SleepCube Heated Humidification System
The SleepCube Heated Humidification System has been designed to offer patients added comfort during the night and ultimately a more effective outcome to their CPAP treatment.
The SleepCube Heated Humidification System docks easily onto the base of the SleepCube unit without the need for a seperate hose or power cord and is compatible with all devices in the range.
The SleepCube Heated Humidification System features 10 available heat settings that can be adjusted to suit patient requirements and its compact design with shallow water chamber and large steel element ensure optimum humidification throughout the night.
Features:
- The SleepCube Heated Humidification design
- Docks easily onto the base of the SleepCube retaining the original footprint of the device
- Compatible with all devices in the SleepCube range; whether it be your CPAP, APAP or BiLevel Therapy machines
- Additional hose or power cord not required
- Optimum humidification throughout the night due to shallow design of the chamber and large heating plate
- The optimum temperature setting is dependant on the ambient temperature and humidity of the room. There are 10 heat settings available; setting 1 results in a heater plate temperature of approximately 84ºF (29ºC), setting 10 results in a heater plate temperature of approximately 149ºF (65ºC)
- Easy to full, assemble and clean
- The SleepCube series CPAP's can all be operated via a 12V DC power source, however please note that the heater will not operate directly from a 12V DC power source, and only cold humidification will be possible
The heater controls of the DeVilbiss Heated Humidification System are located on the keypad and display with heater setting control buttons and a heater power LED.
Controlling the Humidity
The heater setting on the DeVilbiss SleepCube Heated Humidification System can be adjusted in a range of 1 to 10. The optimum temperature setting is dependent on the ambient temperature and humidity of your room. If your room temperature is low, and or the relative humidity is high then a lower temperature setting may be necessary for optimum comfort.
There are 10 heat settings available: setting 1 results in a heater plate temperature of approximately 84˚F (29˚C), setting 10 results in a heater plate temperature of approximately 149˚F (65˚C).
While all of the SleepCube series CPAP machines can be operated via a 12V DC power source, please note that the heater will not operate directly from a 12V DC source, and only cold humidification will be possible.
